hi everyone,
I'm new to nitro trucks, as I have just got a Thunder Tiger MTA4 ( which is awsome by the way :P and barely know how to control one, all i know is reverse, steering and throttle! Any tips you may have on how to improve the performance and control of the vehicle :cruising: would be EXTREMELY helpful!!
thanks, Geordie


ps, does anyone know how to stop the car stalling , it is highly annying,
thanks again :D

hi and welcome to rcr mate check these two links for hop-up part numbers

MTA-4 SLEDGE HAMMER S50

MTA-4 S28

once you got part numbers try some of the shops at the top of the forum

but yz-10 found a site a few nights back that had lots of parts im sure he will put a link up to them :thumbs_up:

hi mate welcome to the site :thumbs_up:

To stop your model stalling, from stand still?

All you need to do its adjust the idle screw on your carb, turn it a tiny amout at a time about 1/16 of a turn or less, anti-clockwise i think, basically take your air-filter off your carb and your see a little hole, adjust the screw so the hole opens a tiny bit, or if you dont want to do that you could just cheat and adjust the throttle trim on your handset :thumbs_up:

hello and welcome to RC racing :thumbs_up:

It may be that u set it to lean on the mixture screw if you have then turn the screw out

Hi and welcome :thumbs_up:

Welcome to the forum!! :thumbs_up: